Centro In Line Centrifugal Tube Extractor Fan Duct Mounting

Out of stock
SKU
CENTRO-CON

Commercial & Residential | Supply & Extract | 1-phase

  • Ventilation for your building — supply or extract air in offices, schools, washrooms and homes.
  • Up to 1,340 m³/h (372 l/s) maximum airflow across the range.
  • Choose your duct size — six 1-phase models from 100 to 315 mm. CENTRO 150 also fits 160 mm ducts.
  • Brackets included for wall or ceiling mounting, with installation in any position.
  • Adjustable fan speed using a compatible external controller, supplied separately.
Commercial & residential ventilation

Blauberg CENTRO Inline Centrifugal Duct Fans

Inline fans for supply and extract ventilation.

Choose a CENTRO inline fan for supply or extract ventilation in offices, schools, washrooms and homes. Six standard sizes fit 100-315 mm circular ductwork, with a 1-phase motor and wall or ceiling mounting brackets supplied.

The compact fan sits within the ductwork, so you can position it away from the room grille. Compare the sizes below, then check which model delivers the airflow your system needs.

100–315 mm ductsSupply or extractExternal speed control
Blauberg CENTRO inline centrifugal fan with mounting bracket
Blauberg CENTRO standard inline centrifugal fan.
6Standard sizes
1,340 m³/hMaximum airflow across the range
100–315 mmCircular duct connections
1-phaseElectrical supply
Inline centrifugal fans

Supply and extract ventilation

CENTRIFUGAL PERFORMANCE

Airflow and pressure

The centrifugal impeller moves air through ductwork. Use the fan curve to check the airflow available at the pressure your duct system needs.

SIX STANDARD SIZES

Duct sizes from 100 to 315 mm

Select CENTRO 100, 125, 150, 200, 250 or 315. The CENTRO 150 model connects to both 150 mm and 160 mm ducts.

INSTALLATION

Wall or ceiling mounting

Install in any mounting position using the fixing brackets supplied for wall or ceiling mounting. Provide access for inspection and maintenance.

MOTOR & IMPELLER

Thermal overload protection

The 1-phase external rotor motor includes ball bearings and integrated thermal protection with automatic restart. The impeller is dynamically balanced.

Architect and building services consultant working together over drawings in a studio

Good ventilation starts with the design.

You've planned the room. The ventilation should fit the plan. With six duct sizes and a compact inline design, CENTRO gives you options for positioning the fan away from the occupied space. Performance curves, sound data and dimensions are all there when you need to check the detail.

See the technical detail

Flexible mounting for ducted ventilation.

Fit the fan around the duct route, with access for the next service visit. CENTRO's supplied brackets allow wall or ceiling mounting, and the range covers 100-315 mm circular ductwork. Keep straight duct sections at the inlet and outlet and leave space to reach the fan once the ceiling is complete.

Find your duct size
Illustrative ceiling-void installation of a Blauberg CENTRO fan in straight spiral ductwork, with access below and separate duct supports
Illustrative ceiling-void installation. Refer to the installation guide for project-specific requirements.
Ventilation trade-counter colleague handing an order to a contractor

A good answer at the trade counter.

One customer is fitting out an office. Another is pricing a washroom extract. CENTRO covers both with one range of six sizes. Clear model references and useful technical data give your counter team a place to start, and your customers a range they can come back to for the next job.

Explore the CENTRO range
A bright lived-in home with people relaxing and discreet ceiling ventilation

Let the room be the thing you notice.

The people using a building want to get on with their day. CENTRO can work out of sight in the ductwork, helping to extract stale, humid air or supply outdoor air as part of the ventilation system. Your installer can help choose the size and controls to suit the way the space is used.

Talk to us about your project
Installation & control

Duct installation and speed control

Fit the fan in a ceiling void, plant room or service area to suit the duct route. Brackets are supplied for wall or ceiling mounting. Leave room for the duct connections and future maintenance.

  • Wall or ceiling mounting with the supplied brackets.
  • Any mounting position to suit the installation and airflow direction.
  • Smooth or stepped speed adjustment using a compatible external thyristor controller or autotransformer.
  • External speed controllers are supplied separately.
CENTRO fan installed between straight rigid spiral-wound ducts
CENTRO installed in rigid spiral ductwork. Ductwork supplied separately.
Fan selection

CENTRO model selection

Start with your duct size, then check the airflow you need. Bends, grilles and duct length add resistance, so the maximum airflow in the table is not the airflow you will get in every installation. Your installer or designer can check the fan curve against the system’s external static pressure.

CENTRO technical data

SpecificationCENTRO 100CENTRO 125CENTRO 150CENTRO 200CENTRO 250CENTRO 315
Duct connection [mm]100125150 / 160200250315
Maximum airflow [m³/h (l/s)]250 (69)355 (99)460 (128)780 (217)1080 (300)1340 (372)
Power [W]807980107173200
Sound pressure at 3 m [dBA]404042464948
Supply / frequency [Hz]1-phase / 50–601-phase / 50–601-phase / 50–601-phase / 50–601-phase / 501-phase / 50
Weight [kg]2.082.202.453.004.304.85
Air temperature [°C]-25...+55-25...+55-25...+55-25...+50-25...+50-25...+50
Ingress protection ratingIPX4IPX4IPX4IPX4IPX4IPX4
Motor IP ratingIP44IP44IP44IP44IP44IP44

Sound figures are catalogue sound pressure levels at 3 m. Installed sound levels depend on the selected duty, ductwork and installation. Use the model performance curves and dimensional data when finalising selection.

Technical advice

Frequently asked questions

Can CENTRO be used for commercial ventilation?

Yes. CENTRO can be selected for general supply or extract duties in offices, schools, washrooms and similar occupied premises. Suitability depends on airflow, system pressure, noise requirements and the condition of the air being moved.

Is it suitable for long or branched duct runs?

Check the total system resistance, including bends, branches and terminals, against the selected fan performance curve. Select the model that delivers the required airflow at the calculated external static pressure and allow for balancing where required.

Can it be used for process or hazardous extraction?

CENTRO is for general ventilation of suitable air. Dust collection, chemical fumes, grease-laden extraction, explosive atmospheres and smoke-control duties require specialist fan selection. Use the product manual and technical advice to confirm the air conditions.

Which CENTRO model should I choose?

Start with the duct size, required airflow and system resistance. Compare the performance curve for the relevant model with your design duty. Duct size or maximum airflow alone does not confirm suitability.

Does CENTRO 150 fit 160 mm ducting?

Yes. The CENTRO 150 model is designed for both 150 mm and 160 mm duct connections.

Can I adjust the fan speed?

Yes. Fan speed can be controlled using a compatible external thyristor speed controller or autotransformer. The controller is selected separately.

Can it be used for supply and extract ventilation?

CENTRO is suitable for either supply or extract ventilation. The installed airflow direction and duct arrangement determine its role in the system.

How is the fan mounted?

The fan can be installed in any mounting position. Fixing brackets are supplied for wall or ceiling mounting.

What is the maximum airflow?

The standard range runs from 250 m³/h (69 l/s) for CENTRO 100 to 1,340 m³/h (372 l/s) for CENTRO 315. The airflow delivered in an installed system depends on its resistance.

More Information
Impeller TypeCentrifugal
Motor TypeAC
Electrical Supply1 Phase 220/250 50/60Hz
© 2025 Blauberg UK Ltd. All rights reserved.